How To Read Resistor Stripes

- September 27, 2018

Basic resistor values range from 01 ohm to 10 megaohms. Every color is different number and you can remember these numbers or you can just use the table on next step.

Free 9 Sample Resistor Color Code Chart Templates In Pdf

Resistors Learn Sparkfun Com

Resistor Color Codes Color Codes Electronics Textbook

Since 10 of 330 010 x 330 33 example3.

How to read resistor stripes. Orient the resistor so you can read the stripes properly. Make sure to read the value of the right most color band to determine the tolerance of the resistor. The value of the resistor is marked on the body using colors.

Hold the resistor or diode with the stripes to the left. To read an axial lead resistor hold the resistor so the gold or silver band is facing to the right. Now you can use those digits and multipliers to follow this procedure for determining the value of a resistor with four stripes.

Green and blue are the first significant digits 56. 56 x 10 560w. Match the numbers with the colors.

Brown is the multiplier 10 1 10 and gold is the tolerance 5. With that knowledge realize that on a four band resistor the third color will always be blue 106 or less and on a five band resistor the fourth color will always be green 105 or less. Warning look for the marking a colored stripe on the diode or resistor that indicates which way.

Black is 0 brown is 1 red is 2 orange is. Give each color a number according to its resistive value. So for a 560 ohm 5 resistor the color stripes will be green blue brown and gold.

Read the first three stripes to find the capacity ohms. The silver stripe means the actual value of the resistor mar vary by 10 meaning the actual value will be between 297 ohms and 363 ohms. Look up the color of the first stripe to determine the value of the first digit.

Look up the color of the. Or there are much resistor calculators that you can use. You are given a resistor whose stripes are colored from left to right as blue gray red gold.

How to read color codes from resistors. Its for the lazi. Then jot down the sequence of the colored bands reading from left to right.

Position the resistor with this band on the right side and again read your resistor from left to right.

Reading A 5 Band Resistor With Gold As A Middle Band